[Hammarlund] Printing BAMA Manual

[Al Parker]

Hi Ollie,
    We have that info on The Hammarlund Historian website.  Go to
"H-Files" and "accessories".  It'll download very slowly, but will
probably be better than what's on BAMA.  At 100dpi the BAMA one should be
good, but maybe the scan was not made from an original.  But the print is
VERY small, so maybe more than 100dpi is needed.
    I have original sheets here, can scan for you if you can't get them
downloaded.
73,
Al, W8UT
New Bern, NC
BoatAnchors appreciated here
http://www.thecompendium.net/radio/
  soon to be at http://www.boatanchors.org
http://www.hammarlund.info

----- Original Message ----- 
From: "Oliver J. Dragon" <spress at rcn.com>
To: <hammarlund at mailman.qth.net>
Sent: Tuesday, January 03, 2006 1:12 PM
Subject: [Hammarlund] Printing BAMA Manual


> Good Afternoon,All,
>
> I have tried to print the BAMA pages for the Hammarlund XC100 Crystal
> Calibrator but am getting very poor quality results for both display and
> printing. The printout is basically not readable here.
> The pages are in djvu format.
>
> I looked at the "properties" of the pages and it looks like they were
> scanned in at 100 dpi which I assume is the reason for the poor quality
> results.
>
> Or am I doing something wrong here?
> Any help appreciated.
>
> Ollie
>
> _______________________________________________
> List Administrator: Duane Fischer W8DBF
> ** For Assistance: dfischer at usol.com **
> ----
> http://mailman.qth.net/mailman/listinfo/hammarlund