[Hammarlund] Alignment

[James A. (Andy) Moorer]

Intermittant meter is almost always the AVC/MAN switch. One pole of the DPDT 
switch turns the meter on and off. They frequently go flakey.

To test the hypothesis, bridge the switch with a clip lead (or just solder a 
wire across it).

James A. (Andy) Moorer
www.jamminpower.com

----- Original Message ----- 

> My SP-600/JX-17 frequency seems to be off by about 115 kc.  Is it likely 
> this is a mechanical problem or an RF alignment problem?  The meter is 
> also intermittent, so maybe a check of the tubes will uncover part of the 
> problem.  Has anyone experienced similar problems?
>