[Hammarlund] SP-600 Project

[Al Parker]

Hi Gary,
    I plugged in a cupla comments below.
Al
----- Original Message ----- 
From: "GBrown" <gkbrown at gwi.net>
To: <hammarlund at mailman.qth.net>
Sent: Monday, March 21, 2005 7:20 AM
Subject: [Hammarlund] SP-600 Project

> Well, I couldn't wait and started the tear down of the SP-600JX-1.
> I am   also missing the power tranny strap that attaches to the two
> standoffs and holds the tranny in place. No biggie
        --right, can be fabricated, i'll send you pic & dimensions if you
want.
  Does it have an R-274 tag on the panel?  If so, what's the s/n there, &
I can point you to the proper skem.
> There are some minor differences in capacitor values.
        -- Don't worry abt using .022's as well as .01's, probably it's in
the -JX-17 manual, if you read the fine print, they say to use .01's
instead of .022's when replacing.  So just put in a 50+ order for .01 disc
ceramics, and maybe 4 or 5 O.D.'s.

73,
Al, W8UT
New Bern, NC
BoatAnchors appreciated here
http://www.thecompendium.net/radio/
http://www.hammarlund.info