[Hammarlund] Painting SP-600 Panel

[James A. (Andy) Moorer]

In fact, you have to use some kind of etching primer or the top coat won't
stick at all. The primer coat does not have to be thick - just an even light
coat will do. Yes, there is a problem with filling up the engraving. Just
use a light touch.


-- 
www.jamminpower.com
James A. (Andy) Moorer





on 12/15/02 6:53 PM, Dave Faria at Dave_Faria@hotmail.com wrote:

> GE list.  I stripped my JX-17 panel today.  It was a lot easier that a 390
> with epoxy paint.  My question is can I spray a zinc chromate primer on b4 I
> paint?  My concern is the red lettering appears not to be as deeply engraved
> as the remaining lettering and I'm afraid of filling in the lettering.  Is
> there a self priming paint that will work for the jx-17?  I did not sand the
> panel.  I used a pressure washer to cut the paint out of the lettering.
> 
> Thanks for ur comments
> 
> Dave Faria
> _______________________________________________
> List Administrator: Duane Fischer W8DBF
> ** For Assistance: dfischer@usol.com **
> ----
> http://mailman.qth.net/mailman/listinfo/hammarlund