[Ham-Mac] flrig 1.4.2.28 posted at

[w1hkj]

http://www.w1hkj.com/alpha/flrig/

	flrig-1.4.2.27_BS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.27_BS.dmg> 	2021-11-10 
08:22 	3.4M 	
	flrig-1.4.2.28.tar.gz 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.28.tar.gz> 	2021-11-10 
08:22 	922K 	
	flrig-1.4.2.28_HS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.28_HS.dmg> 	2021-11-10 
08:22 	2.0M 	
	flrig-1.4.2.28_LI.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.28_LI.dmg> 	2021-11-10 
08:22 	1.8M 	
	flrig-1.4.2.28_setup..> 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.28_setup.exe> 	2021-11-10 
08:22 	1.3M 	
	readme.dmg.txt <http://www.w1hkj.com/alpha/flrig/readme.dmg.txt> 
2021-11-10 08:22 	537 	
	readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt> 	2021-11-10 
08:22 	2.7K 	


Date: Tue Nov 9 19:54:00 2021 -0500 alpha vfo adjust * change increment 
to fractional values start/exit set clock * add user configurable 
commands on program . start - immediately after normal start up . exit - 
immediately after normal exit * add time sychronization if supported by 
xcvr . xcvr clock synchronized to PC clock on next minute rollover, to 
nearest 50 msec. . implemented for these transceiver: - ic7100, ic7300, 
ic7600, ic7610, ic7700, ic7800, ic7851 - FT991, FT991A, FTdx10, 
FTdx101D, FTdx101MP FT1200:time only - TS990 . corrected deactivated 
clock controls on some supported xcvrs

See readme.txt for full list.

73, David, W1HKJ