[Ham-Mac] flrig 1.4.2.27 posted at

[w1hkj]

http://www.w1hkj.com/alpha/flrig/

	flrig-1.4.2.27.tar.gz 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.27.tar.gz> 	2021-11-05 
14:36 	922K 	
	flrig-1.4.2.27_BS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.27_BS.dmg> 	2021-11-05 
14:36 	3.4M 	
	flrig-1.4.2.27_HS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.27_HS.dmg> 	2021-11-05 
14:36 	2.0M 	
	flrig-1.4.2.27_LI.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.27_LI.dmg> 	2021-11-05 
14:36 	1.8M 	
	flrig-1.4.2.27_setup..> 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.2.27_setup.exe> 	2021-11-05 
14:36 	1.3M 	
	readme.dmg.txt <http://www.w1hkj.com/alpha/flrig/readme.dmg.txt> 
2021-11-05 14:36 	537 	
	readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt> 	2021-11-05 
14:36 	652 	


Date:   Fri Nov 5 13:32:00 2021 -0500

     alpha

Date:   Fri Nov 5 13:32:00 2021 -0500

     start/exit set clock

       * add user configurable commands on program
         . start - immediately after normal start up
         . exit - immediately after normal exit
       * add time sychronization if supported by xcvr
         . xcvr clock synchronized to PC clock on next minute
           rollover, to nearest 50 msec.
         . implemented for these transceivers:
           - ic7100, ic7300, ic7600, ic7610,
             ic7700, ic7800, ic7851
           - FT991, FT991A, FTdx10, FTdx101D, FTdx101MP
             FT1200:time only
           - TS990
...


73, David, W1HKJ