[Ham-Mac] fldigi 4.1.18 posted

[w1hkj]

at http://www.w1hkj.com/files/fldigi/

  * fldigi-4.1.18.tar.gz
    <http://www.w1hkj.com/files/fldigi/fldigi-4.1.18.tar.gz>
  * fldigi-4.1.18_i386.dmg
    <http://www.w1hkj.com/files/fldigi/fldigi-4.1.18_i386.dmg>
  * fldigi-4.1.18_setup.exe
    <http://www.w1hkj.com/files/fldigi/fldigi-4.1.18_setup.exe>
  * fldigi-4.1.18_x86_64.dmg
    <http://www.w1hkj.com/files/fldigi/fldigi-4.1.18_x86_64.dmg>

and at Source Forge <https://sourceforge.net/projects/fldigi/files/fldigi/>.

M1 compatible dmgs are at http://www.w1hkj.com/bigsur/

  * HOWTO.txt <http://www.w1hkj.com/bigsur/HOWTO.txt>
  * comptext-1.0.2.01.dmg
    <http://www.w1hkj.com/bigsur/comptext-1.0.2.01.dmg>
  * comptty-1.0.2.01.dmg <http://www.w1hkj.com/bigsur/comptty-1.0.2.01.dmg>
  * flamp-2.2.05.04.dmg <http://www.w1hkj.com/bigsur/flamp-2.2.05.04.dmg>
  * flcluster-1.0.6.dmg <http://www.w1hkj.com/bigsur/flcluster-1.0.6.dmg>
  * fldigi-4.1.18.dmg <http://www.w1hkj.com/bigsur/fldigi-4.1.18.dmg>
  * flmsg-4.0.18.dmg <http://www.w1hkj.com/bigsur/flmsg-4.0.18.dmg>
  * flnet-7.3.3.30.dmg <http://www.w1hkj.com/bigsur/flnet-7.3.3.30.dmg>
  * flrig-1.3.53.27.dmg <http://www.w1hkj.com/bigsur/flrig-1.3.53.27.dmg>
  * linsim-2.0.3.01.dmg <http://www.w1hkj.com/bigsur/linsim-2.0.3.01.dmg>

Install instructions for M1 Apple in the HOWTO.txt file

Version 4.1.18 - Fri Jan 29 05:34:12 2021 -0600 WF fft controls * 
Restore averaging, fft pre filter, latency controls Debug text * add 
millisecond timing to debug time stamp flarq build * fix broken build 
for ./configure --disable-fldigi --enable-debug Exit processing * Set 
PTT off if user elects to close fldigi with PTT enabled. - works for 
both Files/Exit and the dreaded windows decoration bar 'X' button. 
Scheduled Macro * Add PTT OFF during scheduled count down * Add clock 
display on status bar during scheduled count down * remove end-of-line 
'\n' white space between macro tags, i.e. <!WPM:24> 
<LOCAL><!SKED:12:00>how now brown cow<RX> becomes ^!^!how now brown cow 
after parser substitutions * Add space ' ' to end of inserted file 
<FILE:...> if file does not contain either ' ' or '\n' as last character 
xmlrpc * flrig detection update flarq debug * fix to allow 
--enable-debug with flarq build Doc update * CW CAT keying, add IC705 to 
list of tested transceivers Version 4.1.17 4.1.18 should exhibit faster 
shut down. 73, David, W1HKJ