[Ham-Mac] flrig 1.3.53.27 posted at

[w1hkj]

http://www.w1hkj.com/alpha/flrig/

  * flrig-1.3.53.27.tar.gz
    <http://www.w1hkj.com/alpha/flrig/flrig-1.3.53.27.tar.gz>
  * flrig-1.3.53.27_i386.dmg
    <http://www.w1hkj.com/alpha/flrig/flrig-1.3.53.27_i386.dmg>
  * flrig-1.3.53.27_setup.exe
    <http://www.w1hkj.com/alpha/flrig/flrig-1.3.53.27_setup.exe>
  * flrig-1.3.53.27_x86_64.dmg
    <http://www.w1hkj.com/alpha/flrig/flrig-1.3.53.27_x86_64.dmg>

and at http://www.w1hkj.com/bigsur/

  * HOWTO.txt <http://www.w1hkj.com/bigsur/HOWTO.txt>
  * comptext-1.0.2.01.dmg
    <http://www.w1hkj.com/bigsur/comptext-1.0.2.01.dmg>
  * comptty-1.0.2.01.dmg <http://www.w1hkj.com/bigsur/comptty-1.0.2.01.dmg>
  * flamp-2.2.05.04.dmg <http://www.w1hkj.com/bigsur/flamp-2.2.05.04.dmg>
  * flcluster-1.0.6.dmg <http://www.w1hkj.com/bigsur/flcluster-1.0.6.dmg>
  * fldigi-4.1.17.08.dmg <http://www.w1hkj.com/bigsur/fldigi-4.1.17.08.dmg>
  * flmsg-4.0.18.dmg <http://www.w1hkj.com/bigsur/flmsg-4.0.18.dmg>
  * flnet-7.3.3.30.dmg <http://www.w1hkj.com/bigsur/flnet-7.3.3.30.dmg>
  * *flrig-1.3.53.27.dmg* <http://www.w1hkj.com/bigsur/flrig-1.3.53.27.dmg>
  * hamlib-4.0~git.tar.gz
    <http://www.w1hkj.com/bigsur/hamlib-4.0~git.tar.gz>
  * linsim-2.0.3.01.dmg <http://www.w1hkj.com/bigsur/linsim-2.0.3.01.dmg>

for Apple M1 architecture.

Tue Jan 26 21:41:00 2021 -0600 alpha 1.3.53.27 External close command * 
Fix shutdown segmentation fault encountered during shutdown initiated by 
external xmlrpc command Check PTT * add check for NON CAT ptt 
configuration xmlrpc server * correction to data types * change zmsec 
computation * allow xmlrpc requests for get/set_power & get_pwrmeter 
direct access to xcvr i/o. * add xmlrpc command rig.tune . enable 
transceiver tune function * update xmlrpc server method list to 
correctly indicate signature <ret:arg> types * rewrite set numeric as 
integer * add xml_trace statements to get/set . volume, mic gain, rf 
gain, power control IC7300 * Add get/set trace statements FT817ND * add 
trace statements for testing FT847 * add get_modetype macOS serial ports 
* update serial port detection function PowerSDR * Added PowerSDR 
transceiver * compatible with Thetis BigSur serial ports * Modify port 
discovery for Big Sur naming convention Break-in * Add break-in 
selection for transceivers which support set / get CAT commands for 
break-in - Icom, Yaesu - Change enable_break_in to set_break_in - Add 
get_break_in . method . polling Bands * Add missing 1.2 GHz save/restore 
IC7300 power table * modify power table conversion method Pmax * return 
maximum available power to rig.get_pwrmax Autostart * Changes to 
transceiver autostart methods in supported transceivers IC7100 auto 
ON/OFF * rewrite autostart processing to show time for xcvr setup. 7100 
takes about 5 seconds from a CAT wakeup command to when it can process 
additional commands Trace/Debug * Disable text widget update if 
respective dialog not visible * Clear Fl_Text_Display buffer when buffer 
length exceeds 100000 This will prevent excessive use of memory and 
possibility of segmentation fault caused by the text display widget. 
FT736R update * added mode type method xmlrpcpp tracing TOD clock * 
correction to millisecond field Icom sliders * adjust min power for 
7100, 7300, 9100, 9700 Version 1.3.53 73, David, W1HKJ