[Ham-Mac] flrig 1.4.3.15 posted at

[w1hkj]

http://www.w1hkj.com/alpha/flrig/

	flrig-1.4.3.15.tar.gz 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.15.tar.gz> 	2021-12-14 
13:53 	952K 	
	flrig-1.4.3.15_BS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.15_BS.dmg> 	2021-12-14 
13:53 	3.4M 	
	flrig-1.4.3.15_HS.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.15_HS.dmg> 	2021-12-14 
13:53 	2.0M 	
	flrig-1.4.3.15_LI.dmg 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.15_LI.dmg> 	2021-12-14 
13:53 	1.8M 	
	flrig-1.4.3.15_setup..> 
<http://www.w1hkj.com/alpha/flrig/flrig-1.4.3.15_setup.exe> 	2021-12-14 
13:53 	1.3M 	
	flrig-shell <http://www.w1hkj.com/alpha/flrig/flrig-shell> 	2021-12-14 
13:53 	9.3K 	
	readme.dmg.txt <http://www.w1hkj.com/alpha/flrig/readme.dmg.txt> 
2021-12-14 13:53 	555 	
	readme.txt <http://www.w1hkj.com/alpha/flrig/readme.txt> 	2021-12-14 
13:53 	3.0K 	


Changed code areas from 1.3.4.14 are in bold text:

flrig 1.3.4.15 test suite

*UI debug * use --enable-debug (NDEBUG) compilation to allow transceiver 
UI testing. bypasses selrig-check() testing *
     wide ui
       * remove debugging code

     IC756 pro
       * Add missing code to set mode A/B

*Volt meter * Add visible volt meter for supported transceivers . 
IC-705, IC-7100, IC-7300 . IC-7600, IC-7610, IC-9700 . FT-950, FT-991A, 
FTdx101D * Add UI config menu item to access power meter scale selection 
dialog *
     Documentation
       * update documentation

*tmate2 * add support for Elad TMATE-2 control interface *
     XmlRpc modify exchange
       * add xmlrpc exchange structures to modify specific
         transceiver parameters:
         . rig.mod_vfoA d:d modify vfoA by +/- NNN
         . rig.mod_vfoB d:d modify vfoB by +/- NNN
         . rig.mod_vol  n:i modify volume by +/- NNN
         . rig.mod_pwr  n:i modify power by +/- NNN
         . rig.mod_rfg  n:i modify rf gain by +/- NNN
         . rig.mod_wpm  i:s modify CW WPM by +/- NNN
         . rig.mod_bw   i:i modify bandwidth by +/- NNN
           bw modified to nearest requested new value
       * correct get/set/modify vfoA/B
         . Fl::awake call was using a volatile parameter pointer

     Signal Bar
       * Change peak detect and averaging algorithm

     FT450D power out
       * change conversion method CAT string to power out
         update submitted by Brian Waterworth, VE3IBW

     Power Meter Autoscale
       * remove conflicting code causing unstable display

     fl_alert messages
       * correct wording in transceiver not responding alerts

     FreqControl
       * remove FL_RED revers colorization used for testing

     code cleanup
       * remove compile WARNINGS

     embedded/dialog tabs
       * allow user to embed extra's tabs in main dialog
       * save & restore state of tabs dialog / embedded tabs
       * restore visibility of selected tab
       * add configurable tab colors
       * retain state of tabs when changing between embedded
         and dialog visualization
       * retain visibility of embedded tabs when changing
         between small and large sliders
       * retain tab selection color between executions
       * adjust width of tabs dialog to width of main dialog

     cwio-timing
       * accu_sleep not reentrant or thread safe
         - create unique copy of now() and accu_sleep(double)
           for singular use by cwio thread
       * add execution of [ ] control characters when at beginning
         and end of text buffer respectively

     fsk
       * add ability to send FSK signals on DTR or RTS serial
         line, either shared or separate serial port.
       * implement accurate nanosecond timing for Linux, OS-X
         and Windows targets
       * add winmm lib for Windows build
       * correct mark/space levels for RTTY lower sideband signalling

     IC7800 time set
       * Change in support.cxx to enable viewing Misc extras
         tab for transceivers supporting date-time set methods

   Version 1.4.3

73, David, W1HKJ