[Ham-Mac] flrig 1.3.50 posted

[w1hkj]

At http://www.w1hkj.com/files/flrig

  * flrig-1.3.50.tar.gz
    <http://www.w1hkj.com/files/flrig/flrig-1.3.50.tar.gz>
  * flrig-1.3.50_i386.dmg
    <http://www.w1hkj.com/files/flrig/flrig-1.3.50_i386.dmg>
  * flrig-1.3.50_setup.exe
    <http://www.w1hkj.com/files/flrig/flrig-1.3.50_setup.exe>
  * flrig-1.3.50_x86_64.dmg
    <http://www.w1hkj.com/files/flrig/flrig-1.3.50_x86_64.dmg>

and at Source Forge <https://sourceforge.net/projects/fldigi/files/flrig/>.

This IS NOT an April Fool's joke.

73, David, W1HKJ

------------------------------------------------------------------------

Wed Apr 1 2020 - Version 1.3.50 m4-fix * erroneous character in m4 
script MacOS cu serial ports * enable /dev/cu.xxx serial port 
identification * update build.m4 for building with Xcode 11 CW sense * 
CW read CW sense on select Icom transceivers to correctly manage notch 
filter position IC7600 trace * added trace statements to aid user 
debuggin Icom Manual Notch * Adjust notch conversions by bandwidth and 
mode * Following Icom transceivers have notch on/off/set IC7000 . IC7100 
IC7200 IC7300 IC746 IC746PRO IC756 IC756PRO2 IC756PRO3 IC7600 IC7610 
IC7700 IC7800 IC7851 IC9100 IC9700 xmrpc command strings * update to 
read Icom hexadecimal strings FTdx101D * Correct reading of power output 
* Correct behavior of Tune On/Off Remote shutdown * add xmlrpc command 
string "rig.shutdown" - provides remote shutdown of both flrig and 
transceiver if capable and configured FT891 IPO * Add button label 
change to indicate IPO/AMP state IC7100 notch * enable notch functions - 
calibrate IC7100 internal notch value to audio frequency Poll tuner * 
add separate control to enable/disable polling of tuner state Doc Update 
* add location and descriptions of configuration and data files 
Sliders/Auto-on-off * bug fix - disallow UI slider changes when volume 
muted * bug fix - do not transfer data to xcvr on event FL_LEAVE * 
correct slider behavior using mouse wheel * add auto ON/OFF for Icom 
transceivers IC7100 IC7300 IC7610 IC7851 IC9700 mat file aging * add 
aging for freq-mode list files (.mat) KX3 * Change default if_shift for 
digital modes to 1500 IC7100 * add ref adjust, calibrate table for power 
out mkappbundle * modified 'version' to include patch number User 
Command Buttons * Add normal and SHIFT usage to all command buttons - 
allows user to assign on/off etc usage to a single command button. - 
SHIFT-left-button or right-button invokes secondary button command 
string. FTdx9000D * remap power i/o to 5...200 W * correct vfoB 
selection * corect width selection * add power on/off FTdx101MP * add 
FTdx101MP class based off of FTdx101D * add auto on/off to both FTdx101D 
and FTdx101MP Yaesu tuner * change get/set tuner methods for these xcvrs 
- FT991, FT991A Commands * correct indexing error