[Ham-Mac] fldigi 4.1.10 posted

[w1hkj]

At http://www.w1hkj.com/files/fldigi/

  * fldigi-4.1.10.tar.gz
    <http://www.w1hkj.com/files/fldigi/fldigi-4.1.10.tar.gz>
  * fldigi-4.1.10_i386.dmg
    <http://www.w1hkj.com/files/fldigi/fldigi-4.1.10_i386.dmg>
  * fldigi-4.1.10_setup.exe
    <http://www.w1hkj.com/files/fldigi/fldigi-4.1.10_setup.exe>
  * fldigi-4.1.10_x86_64.dmg
    <http://www.w1hkj.com/files/fldigi/fldigi-4.1.10_x86_64.dmg>

and at Source Forge <https://sourceforge.net/projects/fldigi/files/fldigi/>.

This IS NOT an April Fool's joke.

73, David, W1HKJ

------------------------------------------------------------------------

Wed Apr 1 2020 - Version 4.1.10 AWOL CW id button * Fixed "hidden" state 
of CW ID button MacOS * update build.m4 for Xcode 11 Macros * Restore 
execution code for <TUNE * Retain delayed execution code for <!TUNE * 
Create new macro <@TUNE * All three versions allow tune interval to be 
spec'd in fractional seconds, i.e. 2.5, 5.1 10.0 15 * <TUNE:nn.nn> used 
alone returns to receive * <TUNE:nn.nn> followed by text remains in 
transmit to complete the transmission. * Examples: . <TUNE:10.0> . 
<TUNE:5> <TX>tune test <!TUNE:1.5> de w1hkj k <RX> <@TUNE:2.5> * Remove 
text size restriction on CPS test report. RigCat config * restore 
missing control labels CW 5 wpm * 5 wpm farnsworth speed demands larger 
OUTBUFSIZE - increase output buffer to 65536 audio alert * fix seg fault 
- test for existence of audio_alert instance analysis mode * changes to 
data file output - submitted by John Gibbons, N8OBJ flrig auto off * add 
ability to shutdown flrig/xcvr during fldigi shutdown maclogger * 
correct interpretation of UDP frequency string * update transceiver 
frequency based on UDP frequency mkappbundle * modify 'version' to 
include patch level nanoIO * Correct TTY interface code start/stop 
transitions * add code to soften the start/stop transitions for all 
modems CW DTR-RTS * generate CW on selected DTR/RTS signal line * CW 
DTR/RTS signals generated concurrent with AF counterparts and within a 
separate thread. Olivia 2 tones * correct trailing edge cutoff of 
postamble tones Xmlrpc Xcvr * enable QSY when Xmlrpc client xcvr is 
connected mp3 * simplify mp3 conversions - test for file access using 
fopen - use linear sample rate converter contestia cr * correct 
suppression of <CR> display serial port * insure that DTR and RTS are 
always disabled when closing port Check Version * correct version check 
logic