[Ham-Mac] Confused on a mac

[Eddy Martinez]

Yes, stock mic.

Okay. Will apply these settings also. 

Thanks again for the detailed instructions. 

Eddy
KG6SPL

On May 29, 2012, at 4:19 PM, Jim Lee wrote:

> Oh, Eddy - one other thought:  Are you using the stock hand microphone 
> that came with the IC-7000?  If so, the "default" radio settings are not 
> the best.  I would set the Mic Gain to 25% and turn the Compressor ON at 
> level 5 as a starting point.  Then fine tune to your voice using the ALC 
> meter.  That may very well be why you are not being "heard".
> 
> 73,
> Jim W7JLL
> 
> 
> On 5/29/12 3:56 PM, Dave Wright wrote:
>> Looks like Jim, W7JLL, may be your best bet as he also uses the IC-7000. I
>> hope you get on the air soon.
>> 
>> Voice contacts are probably the 1st (easiest) place to start, then after
>> that go for digital once you know your rig&  antenna are working fine.
>> 
>> 73,
>> 
>> Dave
>> 
>> Dave
>> K3DCW
>> www.k3dcw.net
>> 
>> "Real radio bounces off the sky"
>> ______________________________________________________________
>> Ham-Mac mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/ham-mac
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Ham-Mac at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> 
> 
> ______________________________________________________________
> Ham-Mac mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Ham-Mac at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


--
Eddy Martinez
eddy at fasteddy.org
760-529-3278