[Ham-Mac] flrig version 1.3.03 posted

[w1hkj]

Version 1.3.03

     Polling loop fixes
       * Delay acting on flrig bandselect buttons until polling stops.
         - corrects smeter and all else will appearint to lock-up
       * Reset loopcount first thing in serial_thread_loop()
       * Change one MilliSleep call in cbBandSelect()
         - not called if fldigi offline

     Font Initialization
       * Added font initialization to program startup
         - restart after a font select for the frequency display
           caused seg fault due to unitialized font table in the
           FLTK library

     PCR1000
       * Added Icom PCR1000 transceiver

     FT950 Band Select
       * Added delays for very random ping-pong of band selection

     Kenwood transceivers
       * Corrections for split mode detection and display
       * TS590S Corrected method get_split
       * TS2000
         - Increased number of freq digits to 9; least significant digit = 1
         - allows control of VHF frequencies
         - Separated multiple command strings for VFO selection
         - Added read SWR / ALC  meter; disable beeps if enabled
         - Corrected method get_split
         - Added read Power Meter
         - Initialize, read state of menu 012, beeps
           Disable beeps and preset front panel meter to SWR
           Enable beeps at former setting
         - Switch between SWR / ALC when flrig panel display changed by user
       * TS480SAT/HX
         - Corrected precision specifier in TS480SAT class
         - Restored 1 Hz resolution for frequency control
         - Correct method get_split

73, Dave, W1HKJ