[Ham-Mac] flrig-1.1.0 posted

[w1hkj]

http://www.w1hkj.com/

Version 1.1.0 - Maintenance release

73, Dave, W1HKJ

------------------------------------------------------------------------
General changes
 
    Button A/B
   
      Removed A/B button
      Changed A-B select buttons to lighted button

    Default BW
   
      Added default bandwidth method to all transceivers which support
      filter selection as a function of operating mode.

    A-B startup race
      Mods to correct A/B/A race condition during transciever initialization
-----------------------------------------------------------------------
  Kenwood transceivers
    TS570 compile error
      Missing end of method return statement faults on some gcc compilers

    TS590 ptt
      Added modifier to TX; command to specify ACC input signal TX; ==> TX1;
      Changed algorithm for read and write vfo A/B

    TS2000 update
      Vfo-B method additions
------------------------------------------------------------------------
  ICOM transceivers

    ICOM select race
      * Removed two_vfo capability for all IC746 derivatives
      * Added IC7600 CIV codes for vfo select
      * Added set/get BW, Mode for both vfo-A and vfo-B
      * Added split method to base IC746 series

    IC7000 auto notch
      Added set_auto_notch method

    IC7600 update
      Added control methods for mode / bandwidth
      Changed access method for A/B selection
      Added bandwidth tables and CAT for set/get bandwidth
------------------------------------------------------------------------
  RAY152 - vfo
    * Revert to 100 Hz resolution in CAT string
    * Created U values to smeter based on measured values. Measurements 
by Craig, WA8DRZ
------------------------------------------------------------------------
  Ten Tec transceivers

    TT538 vfob
   
      Restored prior operation of vfoB for the Jupiter.  Jupiter CAT
      commands do not provide sufficent control over vfo selection to
      warrant controlling the actual xcvr vfoB.

    TT550 - Pegasus
      * Added correct vfo A/B operation including split
      * Added Model 302 detection/decoding
        supports numeric entries and rotary encoder
      * Added encoder sensitivity/step controls
      * Added transmit bandwidth controls save/restore
-----------------------------------------------------------------------
  Yaesu transceivers
    FT100D
      Added control methods
      Added get_info

    FT847
      Added back end

    FT1000MP
      Bandwidth implementation of full 8.2/455 filter selections
      Changed power scale to square law.  Expands scale below 25 watts.
      Added query methods for swr and alc
      Added method def_bandwidth
      Added method for tuner ON/OFF.  Recycled unused auto-notch front 
panel control