[Ham-Mac] CW Practice

[David Ferrington, M0XDF]

I could be wrong and not tried this yet, but I guess hearing this in your headphones (assuming you mean the are connected to the rig and not the Mac) won't help, since I assume the idea is to have your Mac's built-in mic 'hear' the tones from the rig
73 de M0XDF
-- 
A bit of fragrance always clings to the hand that gives the rose.
-Chinese proverb

On 14 Jun 2011, at 20:36, Richard Hemingway wrote:

> Hi Elwood,
> I am trying CocaModem first.  I have a side tone and have set 
> CocaModem to Wideband CW, and the input to built in line input (I 
> also tried setting system preferences to built in line input). I can 
> hear the sidetone in my earphones (I have break-in off in the radio), 
> however I don't see a vertical yellow area on the waterfall.  What am 
> I doing wrong?
> 
> 73,
> Dick, N5XRD
> 
> 
>> Hello Dick,
>> 
>> CocoaModem ( see 
>> http://homepage.mac.com/chen/w7ay/cocoaModem/index.html ) can do 
>> this without any wires,
>> just using the built in mic on your computer, assuming you can set 
>> up your radio to produce an audible side
>> tone. Just start cocoamodem, select the CW pane, use the Config 
>> panel to set up to use your internal mic for
>> input, then you will start to see a vertical yellow area 
>> representing your "signal" start crawling up the
>> waterfall. Click there and it will start to display decoded CW text.
>> 
>> 73, Elwood, WB0OEW
>> Tucson AZ
> ______________________________________________________________
> Ham-Mac mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Ham-Mac at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html