[Ham-Mac] EchoMac via a DSL Modem

[Tim McLeod]

I had trouble getting EchoLink to work on a Dlink router using the
configuration you listed.  Use the Virtual Server settings to forward the
three ports required to the IP address of the machine.

73 - Tim, VE3TZS


on 9/10/06 12:19 PM, Dick Kriss at aa5vu at sbcglobal.net wrote:

> I was trying to help Patricia, KE5JEX, with her setup and I now have the
> same problem and could use some help.  I made the recommended D-Link router
> settings 
> -----------------
> http://www.echolink.org/firewall_solutions.htm
> 
> - After Name, enter "EchoLink".
> - After Trigger Port, enter 5200.
> - After Trigger Type, choose TCP.
> - After Public Port, enter 5198-5199.
>  -After Public Type, choose UDP.
> ----------------
> and that did not help.  I still cannot hear anything via EchoMac and when I
> connect the stations on the other end cannot hear me.
> 
> I was discussing the issue with K5AXW (who controls the K5AXW-R node) and he
> suggested I check my DSL modem.  I contacted the AT&T DSL Tech Support and
> the lady had never heard of the ports mentioned above and she said the the
> modem was not blocking any ports.
> 
> Any one had EchoMac success via a DSL modem?  Did you have to make
> configuration changes in the DSL modem?
> 
> Dick AA5VU
> 
> 
> _______________________________________________
> Ham-Mac mailing list
> Ham-Mac at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/ham-mac