[Ham-Mac] Airport config

[Slater Tubman]

For what it's worth, I did not follow the thread here, but had a 
seemingly similar concern here, trying to open ports to run Echomac on 
my powerbook G4.  The wireless router is at my wife's iMac.  We had to 
open the ports in the D-link software, not in the Mac software.  To top 
it off, I had to get my son, a computer programmer, to do it for me.  
He lives 500 miles away and just happened to be visiting on a weekend.  
Anyhow, he did it and everything is A-OK.

73

Slater Tubman  VE5OA
K2 4519

On 14-Mar-05, at 1:41 PM, Tim McLeod wrote:

> I don't have a base station available right now to test, but I recall 
> that
> you should use the Airport Admin Utility if the base station is already
> running.
>
> HTH
> Tim - VE3TZS
>
>
> on 3/10/05 5:22 PM, André Geirnaert at ageirna at skynet.be wrote:
>
>> Hello
>>
>> Try to use the airport configuration assistant on a power book G4..
>>
>> In the introduction I choose : change the config of a existing airport
>> base stn
>>
>> In the next page I see my wireless network AP7XR.
>>
>> Next give the password. = ok
>>
>> AND in the next page I DONT SEE NO NAME OF A AIRPORT STATION.
>>
>> TRy to open the ports 5198 and 5199 to use the echomac.
>>
>> Can't open these ports because I can't get the ports menu.
>>
>> Thanks
>>
>> A. Geirnaert
>>
>> ON4VM
>>
>> _______________________________________________
>> Ham-Mac mailing list
>> Ham-Mac at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/ham-mac
>
>
> _______________________________________________
> Ham-Mac mailing list
> Ham-Mac at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/ham-mac
>