[Ham-Mac] EchoMac (problems with Cisco 675)

[Steve Hellyer]

Hi Ross:

Make sure you have same ports open on your built-in firewall as well if 
you have that turned on.  As a test you might turn the firewall off. 
try it, and if it works then you know what to focus on. Use the console 
application to view hit to the firewall.

I don't have a Cisco DSL router but I do have an Apple Airport DSL 
router and it works with that NAT and port forwarding.

73
Steve
VA3SPH

On 6-Jul-04, at 4:00 AM, ham-mac-request at mailman.qth.net wrote:

> I am trying to use EchoMac on my Macintosh G5 running OS X 10.3.?. I
> have a Cisco 675 and added a NAT entry for ports 5198-5200. I must not
> have done that correctly because I can NOT connect to any station ...
> times out after 30 seconds or so and says disconnected. Does anyone
> have EchoMac running with a Cisco 675 router? Please help. (NOTE: This
> might not actually be my problem, so if anyone has any insight... )
>
> Ross DeMeyere, w0ftx
> mailto:w0ftx at arrl.net
> http://w0ftx.com/