[Ham-Linux] Installed Dapper 6.06 still having problems with ax25

[Johnny]

Mike Schmitt wrote:
> I have not installed ax25 stuff before but if you think it should be in
> init.d you can always put it there. Then make links to the correct
> runlevels that it needs to start and stop in? 
> 
> Mike
> 
> On Tue, 2006-04-04 at 11:58 -0500, Johnny wrote:
> 
>>Hi
>>
>>I installed Dapper Drake 6.06 to see if I can get ax25 working, but I am still having
>>the same problems that I did with Brezzy 5.10 from my last time I posted to the group.
>>I am using the linux image 2.6.15-19 that is what it upgraded to.
>>Installed ax25-apps, ax25-tools, but when installed I don't see the config file in 
>>/etc/ax25 and also looked in /etc/init.d/ i don't see the @ax25 file to start ax25.
>>I did do a reinstall of ax25-apps, ax25-tools and I do see the config file now, but 
>>not the @ax25 file in the /etc/init.d/ to start ax25
>>
>>What do I need to do to fix the problem

When I try to start ax25 this is what I get
root at ubuntu-ham:/home/km5im# /etc/init.d/ax25 -start
bash: /etc/init.d/ax25: No such file or directory
So I looked in /etc/init.d/ for ax25 there is no file
I have setup ax25 in the past with no problems.  Until I deside to experiment with 
Ubuntu Brezzy 5.10 had the same problem I emailed other ham linux groups they said 
there was something wrong with the kernel so I am trying Ubuntu Dapper so I am still 
having the same problem.

Johnny
KM5IM