[Ham-Computers] Lines on Laser Printer Output?

Dave 'Doc' Corio dcorio at zitomedia.net
Sat May 30 19:14:05 EDT 2009


	Many laser printer manufacturers suggest you replace the drum when you see
lines on the output. Check your manual to be sure.

	As to using non-company toner and such, I would advise against it. Many of
the "remanufactured" cartridges don't quite match the original. I had a very
nice Lexmark laser printer, and as soon as I put in an off-brand toner
cartridge, it seized up. Found out it had something to do with the sensor on
the toner cartridge not quite matching what the printer was expecting.

	Sometimes cheap just doesn't pay.

73
Dave
KB3MOW


-----Original Message-----
From: ham-computers-bounces at mailman.qth.net
[mailto:ham-computers-bounces at mailman.qth.net]On Behalf Of kd4e
Sent: Saturday, May 30, 2009 7:41 PM
To: ChristianHams at yahoogroups.com; ham-computers
Subject: [Ham-Computers] Lines on Laser Printer Output?


We had been seeing some lines on the output of our Samsung
ML-2251NP
laser printer for a while, even after we replaced the
original toner cartridge
with a new one.

Does this suggest that the drum or something is bad?

The cheapest replacement toner cartridge is a non-Samsung
for $41.  I don't
want to spend that money if the printer is likely to
continue producing the
unwanted lines.

WDYT?

--

Thanks! & 73, doc, KD4E
FS/Swap/Wanted: http://kd4e.com/swapn.html
Free OS : http://www.PuppyLinux.com
Personal: http://kd4e.com
             |_|___|_|
             | | & | |
        /\      {|
       /  \     {|
      /    \    {|
     /   @  \   {|
     |   |~_|~~~~|
     |   -| |    |
============\ # KD4E
Have an http://ultrafidian.com day!
______________________________________________________________
Ham-Computers mailing list
Home: http://mailman.qth.net/mailman/listinfo/ham-computers
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Ham-Computers at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



More information about the Ham-Computers mailing list