[Hallicrafters] How To Unsolder Can Capacitors (or anythingelse?)

[Paul Kraemer]

Care to recommend which Pace for heavy repairs?
I'm always eager to find a better tool
I have trouble with two layer ground planes, can't imagine 7 or 9
Paul K0UYA
----- Original Message ----- 
From: "rbethman" <rbethman at comcast.net>
To: <hallicrafters at mailman.qth.net>
Sent: Tuesday, March 12, 2013 3:01 PM
Subject: Re: [Hallicrafters] How To Unsolder Can Capacitors (or 
anythingelse?)


> It depends on "WHICH" Pace station.
>
> They too have different models.
>
> When someone talks about "small pcb repair", they haven't used the Pace 
> stations that I have.
>
> I've used Pace Stations that EASILY desolder 7 to 9 layer PCBs on a ground 
> that incorporates ALL layers.
>
> The Military used to use them and some other neat "toys" to be able to go 
> down through that 7 to 9 layer board, and build it back up including the 
> in between traces.
>
> Spent quite awhile doing those type of repairs.  Learned tubes *after* 
> working all that solid state gear.
>
> Bob - N0DGN
>
> On 3/12/2013 3:21 PM, Paul Kraemer wrote:
>> Might
>> Pace is good unit but my experience with them is limited to small pcb 
>> repair. They do a good job there
>> Paul K0UYA
>> ----- Original Message ----- From: "Jammer" <zengmeiste at aol.com>
>> To: <hallicrafters at mailman.qth.net>
>> Sent: Tuesday, March 12, 2013 1:54 PM
>> Subject: [Hallicrafters] How To Unsolder Can Capacitors (or anything 
>> else?)
>>> Hmm, would a PACE PPS-5 do the trick?  I have one I'm (probably)
>>> not going to use..
>>>
>>>  73 Terry KC9KEL
>
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html