[Hallicrafters] Pretty much yes to all of you-HT 30

[Duane Fischer, W8DBF]

Hi All,

It sure would be great if 'one' of you would take a few minutes and document 
this interesting, and helpful, thread!!! Please remove the unnescary 
material, such as the headers and footers, etc. Put the original question at 
the top and then add the many responses to it. Please post it to the 
Hallicrafters list! That way it will be automatically saved in the list 
archives. Which, by the way, go back to 1996 or 1997! A HUGE amount of very 
helpful information is contained there.

Thank you to whomever takes his time to do this for present and future Hams 
who need help.

Duane, W8DBF

----- Original Message ----- 
From: "Pete Ferrand" <petef at sprynet.com>
To: "Robert Sauvan" <rsauvan at beyondbb.com>; "Hallicrafters" 
<hallicrafters at mailman.qth.net>
Sent: Thursday, August 08, 2013 12:22 PM
Subject: Re: [Hallicrafters] Pretty much yes to all of you-HT 30


> Hi Bob:
>
> I've been reading this entire thread with a fair degree of amazement.
>
> While you definitely should follow the advice on the power cord, you 
> should also check the antenna circuit from the output connector to the 
> final anode area, and anywhere else it goes, including metering.
>
> It's not impossible that someone added something that puts the ac voltage 
> there. I wouldn't be surprised if someone tied the filament circuit to the 
> antenna line somehow, I've seen stranger things. Also a pinched wire or 
> loose ground somewhere may do something like that.
>
> I bought a receiver Sunday in which a jumper had been added to the circuit 
> board that wasn't screened on the board, nor was it in the schematic, and 
> it made the front end self oscillate uselessly on one band.
>
> Can't make assumptions with old rigs, or old houses or cars for that 
> matter.
>
> 73,
> -Pete
> WB2QLL
> Somers, WI
>
>
>
>
>
>
>
>
> -----Original Message-----
>>From: Robert Sauvan <rsauvan at beyondbb.com>
>>Sent: Aug 8, 2013 11:49 AM
>>To: Hallicrafters <hallicrafters at mailman.qth.net>
>>Subject: [Hallicrafters] Pretty much yes to all of you-HT 30
>>
>>  Cant thank everyone enough for taking the time to help me out. I can
>>pretty much come to the conclusion that I should replace the power cord
>>with a 3 wire. I will do that. Would I still want to put the caps on the
>>ac lines? In answer to another comment as to whether or not the existing
>>power cord is polarized. I will have to say yes, so I cant really turn
>>it around in the plug socket so to reverse it, I will have to unsolder
>>it anyway so I may as well put the proper 3 wire cord on it. I will let
>>you all know how it turns out. I will give you all a break from taxing
>>your brains for a bit and get the cord swapped out and see what happens.
>>In answer to another comment as to whether or no thave the proper
>>equipment to work on the rig and the answer to that is a yes. But I must
>>admit, that is another learning experience for me as well. But you know
>>what, this is a blast getting this figured out, and as soon as I get the
>>problem fixed, I will be looking for a qso from all of you. Any chance
>>of that?
>>
>>Thanks-Bob-W0YBS
>>______________________________________________________________
>>Hallicrafters mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:Hallicrafters at mailman.qth.net
>>
>>List Administrator: Duane Fischer, W8DBF
>>** For Assistance: dfischer at usol.com **
>>
>>
>>This list hosted by: http://www.qsl.net
>>Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 3209/6059 - Release Date: 08/08/13
> 



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 3209/6059 - Release Date: 08/08/13