[Hallicrafters] """"grimy rig

[Roger (K8RI)]

On 10/1/2011 4:15 PM, Carl wrote:

<snip>

>   Remove and pressure
> rinse the scale with a garden hose and the remains is pure virgin steel and
> iron. Protect immediately with a quick drying sealer to prevent flash rust,
> I use the Prep-Step. Many use a non yellowing clear coat or alodine.
Alodine takes a little practice to get a good finish, but the learning 
curve is not steep.  I've used the "Aluminum version" for reconditioning 
Aluminum parts and it left them looking like a new gold finish.

> <snip>
>
> WD-40 and similar will collect dirt in no time if not completely removed.
Fortunately WD40 is mostly solvent, but it does leave an oily residue. 
Unfortunately not enough for a lubricant. <:-))
I purchase it by the gallon which is both cheaper and more efficient 
with no over spray!  If I need a penetrant and lube I use LPS-2 (sparingly)

73

Roger (K8RI)