[Hallicrafters] Bottom chassis/cabinet cover for Hallicrafters SX 28 A needed

[Al Parker]

Hi John,
	IIRC, it's just a flat steel cover with some vent holes, round I think. 
  Seems like Mike Everette & I had some discussion about these a few yrs 
ago and I measured one up and made a sketch.  I'll see if either he or I 
have a cc, if you haven't found one yet.
73,

Al, W8UT
www.boatanchors.org
www.hammarlund.info

"There is nothing -- absolutely nothing -- half so much
worth doing as simply messing about in boats"
Ratty, to Mole

On 7/13/2011 8:16 PM, John King wrote:
> The RE says it all. I have a 1945 Hallicrafters SX 28 A without the bottom cover
>
> for the cabinet/chassis. The old receiver appears to be a good candidate for
> restoration with a minimum of discoloration on the cabinet. A careful paint job
> should take care of that cosmetically.
>
>
> Naturally it will need re-capping and resistor checks and replacement of out of
> tolerance parts. I have it on the bench in line as a winter project.
>
> If you have a bottom cover that you can dispose of or know where I can get one,
> please shoot me an email and let me know. Thanks for reading and any assistance
> you can pass along. 73, John, K5PGW
>
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>