[Hallicrafters] VP2 power pack.

[Carl]

That is a very high value as auto radios used .005 to .01 as far as Im aware 
in 50 years of repairing them.

Id look at the vibrator itself and then research what its manufacturer 
suggested. Mallory, Radiart, and others had catalogs with that info.

As far as voltage 1600V was the norm.

Carl
KM1H


----- Original Message ----- 
From: "Brian Goldsmith" <brian at flex-tel.com.au>
To: <hallicrafters at mailman.qth.net>
Sent: Thursday, December 22, 2011 5:28 AM
Subject: [Hallicrafters] VP2 power pack.


> Seasons greetings to all.
> I have found a VP2 6Volt power pack which I wish to use with my SX28
> receiver.Alas,the buffer capacitor C6 (nominated as a Type C29 Buffer
> Condenser) has no capacitance value shown on the schematic that I
> have.The caps resistance is relatively low however,I can get a reading
> of .072uF using a modern capacitance meter.Is this about the correct
> value? I would expect the voltage rating to be around the 1000V mark.
> Brian G.
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1415 / Virus Database: 2109/4095 - Release Date: 12/21/11
>