[Hallicrafters] Manual for SX-28 F.C.C.

manualman at juno.com manualman at juno.com
Sun Oct 24 17:28:50 EDT 2010


I had heard that in the past and have seen references to that on the web
but my manual marked SX-28 F.C.C., that included a schematic, shows a
pair of 6V6's in the audio output. Never owned one of these receivers so
only going by the documentation.

Pete, wa2cwa

On Sun, 24 Oct 2010 14:01:28 -0700 "Lloyd Godsey" <kk7iz at cox.net> writes:
> The SX-28 FCC model had a single 6V6 audio output tube, as opposed to 
> the 
> push pull 6V6's in the
> regular production radio. I know. I have one. Silver faced no less. 
> Any body 
> interested?
> Thanx
> Lloyd Godsey  KK7IZ
> kk7iz at cox.net
> 480-620-7145
> www.kk7iz-parts.com
> www.lloydsdipsydumpster.com/
> 
> --------------------------------------------------
> From: "Mack Rogers" <n4vgb at yahoo.com>
> Sent: Sunday, October 24, 2010 12:00 PM
> To: <hallicrafters at mailman.qth.net>
> Subject: Re: [Hallicrafters] Manual for SX-28 F.C.C.
> 
> > Thanks Pete, that is what I had presumed but having never had an 
> > opportunity to inspect one with the FCC designation I was not 
> sure.
> >
> > N4VGB
> > Mack Rogers
> >
> >
> >
> > --- On Sun, 10/24/10, manualman at juno.com <manualman at juno.com> 
> wrote:
> >
> >> From: manualman at juno.com <manualman at juno.com>
> >> Subject: Re: [Hallicrafters] Manual for SX-28 F.C.C.
> >> To: hallicrafters at mailman.qth.net
> >> Date: Sunday, October 24, 2010, 1:46 PM
> >> As far as I could tell over the
> >> years, the SX-28 FCC is nothing more then
> >> a SX-28A. Spot checks using several schematics did not show
> >> any
> >> differences in wiring. There might be some minor variations
> >> in component
> >> parts (i.e. potted versus unpotted power transformer) but
> >> no revelations
> >> in design. Of course, over Hallicrafters life span, they
> >> were well known
> >> for not making formally documented circuit and part changes
> >> done on the
> >> production line.
> >>
> >> Pete, wa2cwa
> >>
> >> On Sun, 24 Oct 2010 08:30:32 -0700 (PDT) Mack Rogers 
> <n4vgb at yahoo.com>
> >> writes:
> >> > Other than the addition of the letters FCC to the end
> >> of the model
> >> > designation is there a real difference physical or
> >> electrical in
> >> > this model?
> >> >
> >> > N4VGB
> >> > Mack Rogers
> >> >
> >> >
> >> >
> >> >
> >> > --- On Sun, 10/24/10, Brian Goldsmith 
> <brian.goldsmith at echo1.com.au>
> >>
> >> > wrote:
> >> >
> >> > > From: Brian Goldsmith <brian.goldsmith at echo1.com.au>
> >> > > Subject: [Hallicrafters] Manual for SX-28 F.C.C.
> >> > > To: hallicrafters at mailman.qth.net
> >> > > Date: Sunday, October 24, 2010, 3:39 AM
> >> > > Greetings to all.
> >> > > I have come across an Operating,Alignment and
> >> Servicing
> >> > > Instructions for a
> >> > > model SX-28 F.C.C.
> >> > > I have not seen this on the web and could scan it
> >> to a .pdf
> >> > > file if there is
> >> > > sufficient interest.
> >> > >
> >> > > Let me know via the list.
> >> > >
> >> > > Brian G.


More information about the Hallicrafters mailing list