[Hallicrafters] Re: SX-28 Dial Tracking

[Bob Macklin]

Do you have a SX-28 manual?

Bob Macklin
K5MYJ
Seattle, Wa,
"Real Radios Glow in the Dark"

----- Original Message ----- 
From: <HallicrafterSX28 at aol.com>
To: <Hallicrafters at mailman.qth.net>
Sent: Tuesday, September 16, 2008 7:40 PM
Subject: [Hallicrafters] Re: SX-28 Dial Tracking


> Hi
> This is a problem on some of these old radios.You will notice that by
> adjusting the ferrite cores (which are used to set the low end of the
tuning dial)
> also affects the high end.Usually one has to play with both the  trimmers
and
> the ferrite cores to get the tracking close .Also usually if the  low end
> tracks good the high end goes  off and vice versa.So one has to  reach a
> compromise .
> Nick
>
>
>
>
> **************Psssst...Have you heard the news? There's a new fashion
blog,
> plus the latest fall trends and hair styles at StyleList.com.
> (http://www.stylelist.com/trends?ncid=aolsty00050000000014)
>


----------------------------------------------------------------------------
----


> ______________________________________________________________
>