[Hallicrafters] Chassis Rust

[Mark K3MSB]

Be carefull what you use here or you'll scratch up the chassis.

I've used Naval Jelly with good results for spot and light rust removal.

I agree with Greg;  for a totally rusted chassis, you'll have to
address pitting etc and go the replating route.

73 Mark K3MSB

On 5/3/08, WA1KBQ at aol.com <WA1KBQ at aol.com> wrote:
A short cut method would be to  start by
> disassembling the receiver as much as practical and tape up or mask  areas you want
> to protect from intrusion and go after it with wire brushes,  rotary tools on
> a Dremel, sandpaper and even Muriatic acid if necessary. Clean  and dry and
> paint the chassis with something suitable.