[Hallicrafters] SX-100 MkII

[David C. Hallam]

Well, I have a lot of work to do.  I plan to use this receiver and a HT-37
with a Hallicrafters HA-6 6M transverter.  They all need to be restored.
The HA-37 is in very poor condition and I may just have to start looking for
another.  I still have awhile before the sun spot cycle is really on the up
swing and 6M recovers it full potential.

David
KC2JD/4

> -----Original Message-----
> From: Glen Zook [mailto:gzook at yahoo.com]
> Sent: Friday, July 06, 2007 11:48 AM
> To: dhallam at rapidsys.com; Hallicrafters Reflector
> Subject: Re: [Hallicrafters] SX-100 MkII
>
>
> Unfortunately, Hallicrafters did not fuse a good
> number of their receivers.  I definitely recommend
> changing the power cord to a 3-wire and installing a
> fuse in the black lead.
>
> Radio Shack has some fuse holders available that can
> be attached under the chassis using an existing
> machine screw placement.  You will probably have to
> install a slightly longer screw but should not have to
> drill any holes.
>
> Glen, K9STH
>
>
> --- "David C. Hallam" <dhallam at rapidsys.com> wrote:
>
> I have just acquired a SX-100 Mk II and started to
> bring it back to life. Am I missing something in the
> schematic or is there really no fuse in the AC line?
>
>
>
>
>
>
>
>
>
> Glen, K9STH
>
> Website:  http://k9sth.com
>
>
>
> __________________________________________________________________
> __________________
> Fussy? Opinionated? Impossible to please? Perfect.  Join Yahoo!'s
> user panel and lay it on us.
http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7