[Hallicrafters] Sky Buddy Oscillator Coil

[Joe Walden]

Hello all members of the various reflectors from Joe w5jdy in Okla....   I
have a Hallicrafters Model S-19R
Sky Buddy to repair that will not oscillate on band four (the highest
frequency)...  It works fine on all the other bands.
All associated parts in the oscillator circuit have been replaced..  The
only other parts used on band four that aren't used on the other bands is
the oscillator coil,trimmer cap and a 100 mm cap (all parts are mounted on
the coil form)...   If available,I would like to purchase a band four coil
from a parts unit..  If someone has a parts unit ,the band four coil stands
perpendicular by itself and has a  trimmer capacitor across the top...  It
mounts with two metal screws and is close to the band switch...   You can
just clip each wire a little ways from the each terminal (three on the top
and two on the bottom of the coil) and I will clean it up...    Please email
me availability and total cost shipped to Okla. 73069  and I will send some
cash...     w5jdy at cox.net     If anyone has any advice concerning this
problem I will greatly appreciate it...  I really can't find anything wrong
with the original coil?????   Joe     .