[Hallicrafters] WTB

[Roger K8RI]

> John,
>
> I think the chimney you want is the one for the 3-400Z - not 3-500Z. But, 
> at the same time I have never been sure if the bigger tube and chimney 
> would fit in place of the original set of parts.
>

I don't know if this will help but here's what I found.


The 3-500 is about 1/2" taller (measured from pins to top cap) and 1/10 of 
an inch smaller in diameter than the 3-400

RF Parts just lists a series of three chimneys that will fit. One at 4" 
(also fits 4-400) requires the socket to be mounted 1/4" below the chassis.

Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com (Use return address from home page)

> I am a long time user of the HT-45 Mark IIA along with its matching P-45 
> Power Supply. I run it with an SX-117 and HT-44 receiver and transmitter. 
> A great classic station!!
>
> Good luck to you.
>
> 73,
>
> -Bill, WA9MXQ
>
> -------------- Original message ----------------------
> From: W4AWM at aol.com
>> Chimney for 3-500Z used in HT-45. Please reply direct.
>>
>> Tnx & 73,
>>
>> John,  W4AWM
>> w4awm at aol.com
>> ______________________________________________________________
>> Hallicrafters mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:Hallicrafters at mailman.qth.net
>> ----
>> List Administrator: Duane Fischer, W8DBF **for assistance**
>> dfischer at usol.com
>> ----
>> Hallicrafters Collectors International: http://www.w9wze.org
>
>
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Hallicrafters at mailman.qth.net
> ----
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> Hallicrafters Collectors International: http://www.w9wze.org
>