[Hallicrafters] Power Transformer For SX-28

[Rob Copeland]

IF can status update - Upon examining T2 on my radio and comparing it to a
new one that was sent to me(Thanks Doug!) I immediately discovered the
problem. Apparently the guy that worked on this radio before my friend John
and I had rewired T2 with the circuit board installed in the can upside down
with wires going to the wrong connections. No wonder the Crystal filter
doesn't work at all! I have replaced T3 and it is working beautifully now I
just need to set my radio side by side with my buddy John's so we can
install the new T2 can with the correct connections and I believe this thing
will just take off after that.

Thanks you all for your help... Especially Doug!!!

Rob Copeland


-----Original Message-----
From: hallicrafters-bounces at mailman.qth.net
[mailto:hallicrafters-bounces at mailman.qth.net]On Behalf Of
Troglodite at aol.com
Sent: Monday, April 24, 2006 12:07 PM
To: rob at v6spider.com; Hallicrafters at mailman.qth.net
Subject: Re: [Hallicrafters] Power Transformer For SX-28


Rob,

If it should turn out that one or more of your IF cans are bad, I have an
SX-28 donor carcass here that still has all the IF cans. If you need one,
it's
yours. Glad your power transformer is OK because that part has already been
given away. Likewise, I have no knobs, dials or S-meter, but I do have IF
cans!

Regards,

Doug Moore

______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Hallicrafters at mailman.qth.net
----
List Administrator: Duane Fischer, W8DBF **for assistance**
dfischer at usol.com
----
Hallicrafters Collectors International: http://www.w9wze.org