[Hallicrafters] HT-44 neutralizing capacitor

[Roy Morgan]

At 11:31 AM 1/12/2006, Langston, Mike wrote:
>Hello Everyone,
>
>
>
>I am in need of a replacement neutralizing capacitor for my HT-44 
>project... .8-13 pf piston type... ½ of the screw driver slot has broken 
>off the adjustment shaft on mine

Mike,

Can you get the slug with adjusting screw all the way out?  (some piston 
caps are closed on the end opposite the screw.)  If so, just break or file 
off the remaining part and saw a new slot. The Exacto folks have a nice 
little (5 inches long) saw that does the job nicely.  Get one at your hobby 
shop.

Roy


- Roy Morgan, K1LKY since 1959 - Keep 'em Glowing!
7130 Panorama Drive, Derwood MD 20855
Home: 301-330-8828 Cell 301-928-7794
Work: Voice: 301-975-3254,  Fax: 301-948-6213
roy.morgan at nist.gov --