[Hallicrafters] SX-17 Recap, Redux and Other Issues.

[~DA~]

Ask away. That's how I learned. It's always obvious
once you know where to look.

--- Bill Gerhold <k2wh at optonline.net> wrote:

> DA,
> 
> Closer examination of the transformer under a strong
> light and better
> physical placement of the chassis indicates you are
> correct.
> 
> One of the solder connections on the transformer is
> indeed a dummy terminal.
> It is used as a tie point and from there, the wiring
> goes up to the front
> panel on/off switch.  Shows you what a closer
> examination will do.  Next
> time I will not be so quick with my questions.
> 
> K2WH
> 
> -----Original Message-----
> From: hallicrafters-bounces at mailman.qth.net
> [mailto:hallicrafters-bounces at mailman.qth.net] On
> Behalf Of ~DA~
> Sent: Wednesday, October 26, 2005 5:23 PM
> To: Bill Gerhold; hallicrafters at mailman.qth.net
> Subject: Re: [Hallicrafters] SX-17 Recap, Redux and
> Other Issues.
> 
> Some of you correct me if I'm wrong on this, but the
> power cord is NOT soldered into the txfrmr - it just
> appears that way. It's acually just a mount point.
> This confused me too on my SX-16, which Ed Richards
> starightened me out on. The schematic should show
> this
> mount point as an "x" inside a circle in the line to
> the on/off switch.
> 
> 73,
> DA
> 
> 
> 



	
		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com