[Hallicrafters] Restringing Dial

[alan doss]

Hi Bill, one more thing about the stringing, Smile. be sure you have the 
string exactly like the dial schematic runs, and when you get to the last 
step, you will be right back where you started and right next to the other 
end of the string, at this point make sure the string is tied nice and tight 
to the spring loop, and the tightening is done through the spring as you 
pull it down to the side of the wheel and connect it, I find a needle nose 
pliers works very good for this part, 73's Alan.

>From: Bill Gerhold <k2wh at optonline.net>
>To: 'Hallicrafters' <Hallicrafters at mailman.qth.net>
>Subject: [Hallicrafters] Restringing Dial
>Date: Sun, 10 Jul 2005 13:55:52 -0400
>
>
>I am about to embark on the restringing of a S-38EM receiver.  I have never
>done this before, but from what I see in the manual, it seems to be fairly
>straight forward.  My question:  It is safe to assume that the restringing
>diagram as lettered A-G is the route the new string should go?  In other
>words, start at "A" and continue to "G" with all the intermediate stops "B"
>- "F".
>
>K2WH
>
>
>
>
>______________________________________________________________
>Hallicrafters mailing list
>Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
>Help: http://mailman.qth.net/mmfaq.html
>Post: mailto:Hallicrafters at mailman.qth.net
>----
>List Administrator: Duane Fischer, W8DBF **for assistance**
>dfischer at usol.com
>----
>Hallicrafters Collectors International: http://www.w9wze.org

_________________________________________________________________
Is your PC infected? Get a FREE online computer virus scan from McAfee® 
Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963