[Hallicrafters] Rubber Feet

[GBrown]

Barry, Dave and the group. I have a few sets of these feet still in
inventory.
Regards,
Gary...WZ1M
----- Original Message ----- 
From: "Barry H" <barry_hauser at juno.com>
To: <dhallam at rapidsys.com>
Cc: <n5tde at earthlink.net>; <hallicrafters at mailman.qth.net>
Sent: Wednesday, December 28, 2005 10:34 AM
Subject: RE: [Hallicrafters] Rubber Feet


I'm assuming the square feet for the HT-32/37 are the same or similar to
those on the SX-42's and other Hallicrafters or maybe close enough in
design.  I think even the SX-28's have them.

If so, it shouldn't be too difficult to carve new ones out of scrap
rubber -- possibly cut from an old tire or whatever.  First cut the
rectangle, then bevel the outside edges.  The tougher part is to carve out
the hollow where the rectangular "washer" goes.

Another approach would be to mold them out of some liquid rubber product -- 
such as the stuff you dip tool handles into to give them red or black grips,
or maybe even Permatex.

Never done it - just hoping to provoke someone else into going first ;-)

Barry




-- "David C. Hallam" <dhallam at rapidsys.com> wrote:
Thanks for the information.  There are a couple of big Ace Hardware stores
not too far from me.  I will check.

I was really looking for exact reproductions rather than just replacements.
Maybe I will check into seeing if there is some way to get them made at a
reasonable cost.

David
KC2JD

-----Original Message-----
From: M. Ross Dumke [mailto:n5tde at earthlink.net]
Sent: Monday, December 26, 2005 4:00 PM
To: dhallam at rapidsys.com
Subject: RE: [Hallicrafters] Rubber Feet


The updated Ace hardware stores are carrying a great collection of rubber
feet and and plastic shapes both metric and inch-N5TDE
-----Original Message-----
From: hallicrafters-bounces at mailman.qth.net
[mailto:hallicrafters-bounces at mailman.qth.net]On Behalf Of David C.
Hallam
Sent: Sunday, December 25, 2005 1:05 PM
To: Hallicrafters List
Subject: [Hallicrafters] Rubber Feet


Has anyone ever had any reproduction made of the square rubber feet for the
HT-32/37?

David
KC2JD


______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Hallicrafters at mailman.qth.net
----
List Administrator: Duane Fischer, W8DBF **for assistance**
dfischer at usol.com
----
Hallicrafters Collectors International: http://www.w9wze.org