[Hallicrafters] Substitute for 1n3487 sicicon rectifiers PS-150

[wb8jkr at juno.com]

  Should'nt be an issue, any general purpose
2.5 amp 1KV piv diode will work just
fine, I.E. a HEP-170, ECG-125, or
even a RCA SK3081 should be fine with
lots of reserve.

Mark  WB8JKR


On Fri, 12 Nov 2004 19:21:22 -0600 "Robert Keeble KG4NVX"
<hiddenhills at surfmore.net> writes:
> Resurrecting an SR 160/PS150 PS. In going through the PS I found the 
> bridge rectifier circuit only contained 2 silicon 1n3487 instead of 
> 4.  A couple of small unknowns were in the other two places.
> The rig came up and was working fairly well for a couple days and 
> then started blowing fuses. I am ready to recap and would like to 
> add new rectifiers also.
> 
> Can anyone help me with a source for an equivalent component for the 
> 1n3487 top hat?
> 
> Tnx  Bob, KG4NVX   
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Hallicrafters at mailman.qth.net
> ----
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> Hallicrafters Collectors International: http://www.w9wze.org
>