[Hallicrafters] SX-25

[Gerry Steffens]

The red markings on mine are as follows:


80m = 22.75
40m = 56.10
20m = 10.50
10m = 32.75

Note the decimals are estimated.

Cheers from Minnesota,

Gerry


Collecting & Restoring since 1960s
Gerald Steffens P.E.
Oronoco, MN


-----Original Message-----
From: hallicrafters-bounces at mailman.qth.net
[mailto:hallicrafters-bounces at mailman.qth.net] On Behalf Of Mark Bell
Sent: Thursday, November 04, 2004 9:02 PM
To: Hallicrafters List
Subject: [Hallicrafters] SX-25

Folks --

I recently picked up an SX-25.  .

To use the band spread correctly, you need to position the main tuning so
the the various band indicators are over the main window's veritcal line.
The problem is, those numbers are faded!!  The rest of the dial is great,
it's those designators that are gone.

I can barely see one -- it reads "40M", and is above the number 56 on the
logging scale.

There should be indicators for 10M, 20M, 40M, and 80M.  Can someone please
check and see what logging scale number they're above?

Thanks

Mark K3MSB





______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Hallicrafters at mailman.qth.net
----
List Administrator: Duane Fischer, W8DBF **for assistance**
dfischer at usol.com
----
Hallicrafters Collectors International: http://www.w9wze.org