[Hallicrafters] SX-101/101A Main Tuning Knob

[Marshall M. Dues]

Hello, Mike, and All,

I measured all 3 of my HT-37 transmitters and my SX-101A and got the 
following measurements:

	HT-37	= 1.65625" (or, 1-5/8 + 1/32") see photo

	SX-101A = 1.976"   (or, 2" - 1/32" )  see photo

I will send two close up, high resolution photos under separate cover to 
  KL7CD's address.

Hope this helps,

73

Marshall Dues,  WB5MYO
Katy, TX


Langston, Mike wrote:
> Don, KD9MF thinks the grey knobs on some of the later models may be the same
> as the 101, only different in color. The color doesn't matter because it's
> just going to be used to make a mold. I need your help again everybody. 
> 
>  
> 
> If anyone has a SX-111, HT-37, etc. please measure the knob diameter at its
> widest dimension across the front edge. The good SX-101A knob I have
> measures 1-7/8". I'm afraid the large grey ones are 1-1/2" and won't do.
> .....
> Mike Langston KL7CD
> 
> 
> 
>