[Hallicrafters] HT-37 & PTT???

[George KB2Z]

Hello again all,

Thanks to all for the advise and suggestions with the PTT. I downloaded the 
73 mag mod from Al's site and accepted two other offers for mods. An sase 
for a factory mod from Ken, and a QST mod for PTT and QSK from Larry later 
in the week.
My question now is probably more of an opinion type, but not knowing which 
mic. might be better with the HT-37 I thought I would ask.
I have a Knwd. MC-50 (50k ohm) wired for a TS-530, with a spare 4pin 
chassis mount in the junk box.
The chassis mount looks to be the same diameter as the original mic.
I also have a Turner 254 wired for a T-4X. I dont have a spare female 
connector and it looks like it might need a washer to fill the gap.
As long as it works I dont really care about the look.
Would one of these mics. be preferable to the other from an audio standpoint?

Again thanks, George KB2Z


At 07:25 AM 2/18/04 -0500, you wrote:
>Good morning all,
>
>I got to checking out my new HT-37 last night after reading the manual and 
>see no provision for PTT.
>Do you wire it somehow through the 11 pin jack and use it with MOX? I live 
>in a loud house, 4 harmonics, with music, animals, and friends. VOX is 
>hard to control in the noise.
>
>Thanks in advance for any info., or suggestions, George KB2Z
>
>
>---
>Outgoing mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/04
>
>
>--- StripMime Report -- processed MIME parts ---
>multipart/mixed
>  text/plain (text body -- kept)
>  text/plain (text body -- kept)
>The reason this message is shown is because the post was in HTML
>or had an attachment.  Attachments are not allowed.  To learn how
>to post in Plain-Text go to: http://www.expita.com/nomime.html ---
>_______________________________________________
>List Administrator: Duane Fischer, W8DBF **for assistance**
>dfischer at usol.com
>----
>Hallicrafters Collectors International: http://www.w9wze.org
>----
>http://mailman.qth.net/mailman/listinfo/hallicrafters


--- StripMime Report -- processed MIME parts ---
multipart/mixed
  text/plain (text body -- kept)
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---