[Hallicrafters] SX-28 Recommended Modifications?

[David Woodhead]

Besides changing out the paper caps are there any other recommended mods for
the SX-28?

Anything published in old QST's?

How about lowering the antenna input Z to 50 ohms?

Thanks

David
KM5TZ
----- Original Message -----
From: "Lee Bahr" <pulsarxp at earthlink.net>
To: <hallicrafters at mailman.qth.net>
Sent: Saturday, August 14, 2004 9:30 PM
Subject: Fw: [Hallicrafters] SX-71 set screw size


> This is not an allen wrench set screw.  It is a Bristol set screw.  If you
> use an allen wrench, you will screw up the bristol socket if you have not
> already done so.  You need to get a set of bristol wrenches.
> Lee
> w0vt
>
> From: "Tim Kass" <timkass at hotmail.com>
> size
>
>
> >
> > Hello group, trying to restring the dial cords on the pulleys on my
SX-71,
> > what fun!  NOT...anyway, need to get the front pulley off in order to
> reach
> > the rear one, does anyone know what size that darn allen wrench is?
> >
> > 73,  Tim  K8WBL
>
>
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Hallicrafters at mailman.qth.net
> ----
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> Hallicrafters Collectors International: http://www.w9wze.org