[Hallicrafters] Capacitors and HT-37

[David Harmon]

Well said Glen....

Regards

Dave Harmon
NSRCA 586
K6XYZ at comcast.net
Torrance, Ca.

-----Original Message-----
From: hallicrafters-admin at mailman.qth.net
[mailto:hallicrafters-admin at mailman.qth.net] On Behalf Of Glen Zook
Sent: Sunday, October 12, 2003 4:23 PM
To: Mark Bell; Bill; Hallicrafters
Subject: Re: [Hallicrafters] Capacitors and HT-37

They aren't big any more, but Mouser definitely has
filter caps up to 500 volts at the values necessary. 
Any higher voltage original caps were actually 2 caps
in series in the same cardboard tube although they
said "700 volts" or something similar on the outside.

The modern electrolytics are much closer in tolerance
than the old ones and are about 15 to 20 percent the
size of the old ones.  Old capacitors had a tolerance
of -50/+80 percent.  The new ones come in either +/-10
or +/-20 percent.  Those in the 20 percent range work
fine and cost less than half of those in the +/-10
percent range.

I use them all the time in repairing boat anchor
equipment.  The newer capacitors certainly do not
"look like" the older ones, but they definitely work. 
In fact, they work better than the originals.

Glen, K9STH


--- Mark Bell <bell at blazenet.net> wrote:

I don't think Mouser carries the big filter caps, at
least they didn't when I was working on my HT-37.

=====
Glen, K9STH

Web sites

http://home.comcast.net/~k9sth
http://home.comcast.net/~zcomco
Contributing Editor Collins Journal

__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
_______________________________________________
List Administrator: Duane Fischer, W8DBF **for assistance**
dfischer at usol.com
----
Hallicrafters Collectors International: http://www.w9wze.org
----
http://mailman.qth.net/mailman/listinfo/hallicrafters