[Hallicrafters] On Behalf Of Brian Crawford

[Bill Gerhold]

Nebraska Sales has the transformer you need.  I purchased one from them
for an SX-17.  It has all the taps you need and will handle 20 watts.

Bill
K2WH

-----Original Message-----
From: hallicrafters-admin at mailman.qth.net
[mailto:hallicrafters-admin at mailman.qth.net] On Behalf Of Duane Fischer,
W8DBF
Sent: Wednesday, November 26, 2003 1:02 PM
To: hallicrafters at mailman.qth.net
Subject: [Hallicrafters] On Behalf Of Brian Crawford


	
brian.crawford at shaw.ca	
	
I need to provide an 8ohm output from my SX42 (instead of the 500 or
5,000 ohm output).  Given that old hallicrafters spkrs are beyond budget
there seems to be 2 choices;
-connect a 500 (or 5k) to 8 ohm xfmr to the existing speaker output
or
-replace the 6,000ohm CT to 500 & 5k existing xfmr with a 6k CT to 8 ohm
xfmr 

Looking for:
 -advice on the best choice
and
-a good source for the xfmrs (the only source I've found that's close is
"Tubes and More" and they only have a 8,000 CT to 8 ohm but the cost is
about $34.00 US (almost $50 Canadian)

Your suggestions and advice are appreciated.

Brian VE7BGC

_______________________________________________
List Administrator: Duane Fischer, W8DBF **for assistance**
dfischer at usol.com
----
Hallicrafters Collectors International: http://www.w9wze.org
----
http://mailman.qth.net/mailman/listinfo/hallicrafters