[Hallicrafters] HT-32B Alignment

[Glen Zook]

In terms of the 6146B type replacing the
6146/6146A/8298:  Sometimes it works, most of the time
it doesn't!  You have to see if they will neutralize. 
If they won't neutralize, or if the neutralization
doesn't stay put, then you really need to go back to
the 6146/6146A/8298 series tubes and not the
6146B/8298A.

Also, even the  transmitters introduced after the
6146B came out if they were not designed for the 6146B
(and most were not), then you can definitely have
problems.

Glen, K9STH


--- "PETER A. STRATIGOS" <peters7 at mindspring.com>
wrote:

I recently read the Collins reflector article on
> the use of 6146Bs in stead of the plain Jane 6146s. 
> I belatedly realized I did my alignment using 6146W
> (which the article says are the same as teh 6146Bs).
>  Since this transmitter preceded the 1964
> introduction of the 6146Bs (per the Collins article)
> has anyone had any experiece running an HT-32B with
> the 6146Bs rather than the plain Jane 6146?

=====
Glen, K9STH

Web sites

http://home.attbi.com/~k9sth
http://home.attbi.com/~zcomco

__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - establish your business online
http://webhosting.yahoo.com