[Hallicrafters] SX-28 diagrams
paulk
paulk01 at bigpond.com
Mon Feb 10 13:34:31 EST 2003
I find a digital camera with good macro facility (eg Sony DSC30) is a very
useful way to get a record of how things are wired up. Saves drawing up
diagrams of component placement
Regards
Paul
-----Original Message-----
From: psturdivant n1ps <sturdivant at adelphia.net>
To: Scott Seickel <polaraligned at earthlink.net>;
hallicrafters at mailman.qth.net <hallicrafters at mailman.qth.net>
Date: Friday, February 07, 2003 6:01 AM
Subject: Re: [Hallicrafters] SX-28 diagrams
>Hi Scott,
>
>I have re-capped a couple 28s. There are no good parts layouts that I am
>aware of. You're just going to have to ID each cap via the schematic and
>tube layouts. The wax caps are easily found anyway. Make sure you look at
>the RF, mixer and IF stage resistors too. I drew up pictures of each
>stage and where each component connects in. Then I replaced them. The
>components under the RF section are a serious endeavor as the shafts have
to
>be removed (there was site that that spelled out a step by step approach to
>this).
>
>Hope this helps.
>ps
>----- Original Message -----
>From: "Scott Seickel" <polaraligned at earthlink.net>
>To: <hallicrafters at mailman.qth.net>
>Sent: Thursday, February 06, 2003 6:35 PM
>Subject: [Hallicrafters] SX-28 diagrams
>
>
>> I am looking for a resistor and capacitor placement diagram for the
>> SX-28. I bought the Army manual from the guy on the e-place and
>> I am very disappointed in it. His reproduction is excellent but the
>> manual info stinks. There are no parts placement diagrams which makes
>> weeding through the set a pain. The manual differs on a number of
>resistor
>> values but only by a small amount. (eg. set is 500k, manual says 470k).
>> Manual appears to be for later models and probably "A" model. Most of
>> the manual thickness is a comprehensive theory, but if you are in need of
>> reading it maybe you should be restoring a simpler set (or none at
all!!).
>>
>>
>> Is there a source online where I can download these parts placement
>> diagrams?
>>
>> If not, would anyone be so kind as to e-mail me some scanned images?
>>
>> Thank You,
>> Scott
>>
>>
>> _______________________________________________
>> List Administrator: Duane Fischer, W8DBF **for assistance**
>> dfischer at usol.com
>> ----
>> Hallicrafters Collectors International: http://www.w9wze.org
>> ----
>> http://mailman.qth.net/mailman/listinfo/hallicrafters
>>
>
>_______________________________________________
>List Administrator: Duane Fischer, W8DBF **for assistance**
>dfischer at usol.com
>----
>Hallicrafters Collectors International: http://www.w9wze.org
>----
>http://mailman.qth.net/mailman/listinfo/hallicrafters
More information about the Hallicrafters
mailing list