[Hallicrafters] SX-100 S Meter

[edben]

I don't see any other reply on this, so here goes my thoughts.  I don't have
an SX-100, but on my old SX-42 (and most similar boat-anchors) you'll find
that the S Meter works ONLY when the AVC is on.  That being the case, it's
possible that your switch may be mounted "upside-down" so that the markings
read exactly the opposite of what they should!

The simple answer often is the real answer!

Ed Benjamin -- The old WWII Liberty Ship Radio Operator.

----- Original Message -----
From: "Wayne Light" <hwlight at sbcglobal.net>
To: <hallicrafters at mailman.qth.net>
Sent: Tuesday, April 22, 2003 11:23 PM
Subject: [Hallicrafters] SX-100 S Meter


> I'm finishing up a restoration job on my SX-100.  I have a problem with
the S-Meter that I hope someone can help me with.  The S meter seems to work
fine with the AVC in the off position.  When the AVC switch is turned on,
the S meter goes dead.  Any ideas out there?  Thanks!Wayne K7NCE