[Hallicrafters] SX-101A Receiver Problem

[Glen Zook]

Are you "muting" the receiver or letting it "run" when
you are transmitting?  If you are not "muting" the
receiver, I would definitely try that.  There are
appropriate connections on the back of the receiver
for this.  You use a normally closed set of relay
contacts to place the receiver in "operating"
condition (with the power switch in the "standby"
position).  When you transmit, those contacts are
"opened" by the activation of the realy and the
receiver is muted, thus protecting the various
circuits from overload.

Glen, K9STH


--- Dick Butler <dicbutler at prodigy.net> wrote:
 
> I have a SX-101A that works great,but when I key the
> HT-32A xmtr the audio on the rcvr drops to a level
> that I can hardly hear. In about two to three
> minutes the audio will slowly return to normal!


__________________________________________________
Do You Yahoo!?
Yahoo! Greetings - send holiday greetings for Easter, Passover
http://greetings.yahoo.com/