[Hallicrafters] re: Volt-Ohm meter

[Ronald Oberloh]

I usually use an oscilloscope as my voltmeter and alignment indicator.  Works
great.

W4AWM at aol.com wrote:

> I feel that using a digital meter to troubleshoot boatanchors (except for
> checking resistor values) will cause one more trouble.  State of the art
> servicing back in those days was dine with analog meters and all the service
> manual voltage charts were derived from analog meter readings.  Also many
> digital meters will not give an instantenous reading which may be required in
> some cases as has been pointed out already.
>
> A good example of this is trying to measure filament voltage on a pair if
> 3-500zs after installing step start protection. By the time the digital meter
> got settled down, the step start had already kicked in and it was impossible
> to read the initial filament voltage. The little Triplett 310 was right there
> with the correct answer.
>
> 73,
>
> John,  W4AWM
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> Hallicrafters Collectors International: http://www.w9wze.org
> ----
> http://mailman.qth.net/mailman/listinfo/hallicrafters