[GreenKeys] Model 33 ASR Keyboard question

[Jeffrey Golas]

You might need to adjust the H plate.

Also if the studs are missing from the plate and its sitting too low, that prevents keys from pressing oddly. Try raising the plate.

Jeff

> On Jun 12, 2025, at 11:20 PM, Mike Katz <bitwiz at 12bitsbest.com> wrote:
> 
> I took the printer part of my teletype out of the bottom to clean it and replace the oil pad.
> 
> In order to put the h-plate back i had to remove the keyboard cover.  I thought i was super careful, however, when I got the keyboard cover back on, I had lost the ability to type all control characters include Carriage Return and Line Feed.
> 
> The printer still prints then if I send remotely but they keyboard wont' type or send any control character  It looks like the control key is installed correctly but I'm lost.  In my model the control key is short and doesn't hit the 6th codabar.
> 
> Any one have any ideas?
> 
> Thank you
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jeffg at junknet.net