[GreenKeys] M-15... Auto Line Feed After every printed character

[hwhall@aol.com]

Is it absolutely every character or are there some possible letters that don't do it (testing for a stuck code lever or bar)?

Have you tried hand turning the motor & watching the mechanism go through a cycle or two?

Wayne
WB4OGM

On Saturday, July 19, 2025 at 03:12:42 PM MDT, john WA4KWK <wa4kwk at gmail.com> wrote:

I want to thank everyone that responed to my cry for assistance. Still have the problem. Very strange though. The unit was running great for years. Then needed to move so I removed the keyboard and lifted the typing uint off the base. When I reassembled the two pieces, problem surfaced. In local loop it does it with every key I press on the keyboard. Pulled the keyboard and ran ITTY through my ST-6... same issue. Perfect typing just a line feed after every character. 

Thanks again for the comments.
John
WA4KWK
Florida


______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hwhall at compuserve.com